To Next PageTo Next PageWhat to do if my Rain Soft Water System has poor water quality?
If you are experiencing poor water quality with your Rain Soft Water System, there are a few potential causes. First, the raw water source might have changed, requiring a new water analysis from your RainSoft dealer. Second, check if the bypass valve is closed; if not, close it. Finally, ensure the power supply is properly connected.
How to troubleshoot loss of water pressure in Rain Soft TC 75 CV Water System?
If you're experiencing a loss of water pressure with your Rain Soft Water System, the first step is to bypass the system. If the problem persists after bypassing, it is not related to a RainSoft product; check your water distribution system. If bypassing resolves the issue, contact your RainSoft Dealer for service. Another potential cause is low pressure to the unit.
How to fix Rain Soft Water System that regenerates at the wrong time?
If your Rain Soft Water System regenerates at the wrong time, it is possible that the computer is not set properly. Reset the time of day/hour of regeneration.
What causes constant flow to the drain in Rain Soft TC 75 CV Water System?
Constant flow to the drain in your Rain Soft Water System can be caused by foreign material in the valve, which requires cleaning by your RainSoft Dealer. Another possible cause is excessive water pressure; in this case, install a pressure regulator.
Essential safety guidelines and procedures for testing raw water quality prior to installation.
Connecting external water lines, bypass valve, and yoke assembly for proper water flow.
Connecting the drain line, air gap, and installing the brine safety float for system operation.
Connecting brine lines and completing the system's electrical connection for power.
Diagnosing and resolving common problems like regeneration failure, low pressure, and poor water quality.
General| Brand | Rain Soft |
|---|---|
| Model | TC 75 CV |
| Category | Water System |
| Language | English |
