EasyManua.ls Logo

Rain Soft Hydrefiner II - User Manual

Rain Soft Hydrefiner II
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part No.: 16806
Rev: C 05/16
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV ,Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested
and certified by WQA to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated by test data.
See the performance data sheet for specific reduction claims.
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV, Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested
tested and certified by WQA to NSF/ANSI 372 for low lead compliance.
™
Rainsoft Division of Aquion, Inc
101 S. Gary Ave
Roselle, Illinois 60172
1.847.437.9400 or 1.800.860.7638
www.rainsoft.com
Premium Drinking Water System
II
Hydrefiner

Table of Contents

Questions and Answers

  • R
    Rachel BookerAug 3, 2025
    What to do if there is no or low pressure at the outlet of my Rain Soft Water System?
    • A
      Amber HaysAug 4, 2025
      If your Rain Soft Water System has no or low pressure at the outlet, first, ensure the water supply is turned on. If it is on, check for any blockages in the water supply line and clear them. If the blockage is internal to the Hydrefiner II or external with the water line, contact your Rainsoft Dealer. Also, the sediment cartridge may be fouled, in that case replace the sediment cartridge and contact your Rainsoft Dealer for new filters. Lastly, inspect the incoming water line for crimps or pinches and remove any obstructions.
  • A
    Austin CortezAug 10, 2025
    Why does my Rain Soft Hydrefiner II Water System produce “milky” colored water or ice cubes?
    • C
      Courtney JohnsonAug 10, 2025
      If your Rain Soft Water System produces water or ice cubes with a milky color, it could be due to small air bubbles, which do not affect the system's performance. Another cause could be air trapped inside the filter housing; in this case, open the faucet and let the water run for 3 to 5 minutes after installation and filter changes. High concentrations of total dissolved solids (TDS) can also cause cloudiness. To address this, consider reducing the TDS concentration using deionization, distillation, or reverse osmosis. Note that this system has not been tested or approved for TDS reduction.
  • R
    Robert GeorgeAug 16, 2025
    How to fix taste or odor issues with my Rain Soft Hydrefiner II Water System?
    • C
      Charles HillAug 16, 2025
      If your Rain Soft Water System has a general taste or odor issue, the filter cartridge may be saturated. Replace the filter cartridge to resolve this.
  • S
    Sharon WintersAug 22, 2025
    Why does my Rain Soft Water System smell like rotten eggs?
    • J
      Jose WalkerAug 22, 2025
      If your Rain Soft Water System produces a rotten egg odor, it typically indicates the presence of hydrogen sulfide (H2S) gas in the water. Treat the water for hydrogen sulfide reduction and replace the filter cartridge. Note: This system has not been tested or approved for hydrogen sulfide reduction.
  • A
    Ariel CookAug 27, 2025
    What to do if my Rain Soft Hydrefiner II has an odor with color on the filter cartridge?
    • T
      Tonya MillerAug 27, 2025
      If your Rain Soft Water System exhibits an odor along with color on the filter cartridge, it may be due to hydrogen sulfide (H2S) caused by iron (orange/blackish color) and/or decaying organisms (slimy; blotchy colors). Have your water tested for iron and/or sulfur bacteria. If present, seek professional advice on proper well cleaning, disinfection, or treatment. If no iron/sulfur bacteria are detected, treat the water for hydrogen sulfide reduction using an appropriate device. Note that this system has not been tested or approved for the reduction of iron bacteria, sulfur bacteria, or hydrogen sulfide.

Summary

System Specifications

Operational Parameters

System operating pressure, temperature, and usage guidelines.

Model Data Chart

Installation Guide

Preparation and Components

System Assembly

Steps for installing the inlet valve, filters, and securing housings.

Faucet and Tubing Connection

Instructions for mounting the faucet and connecting system tubing, including flow restrictor.

System Start-Up Procedure

System Flushing

Maintenance and Filter Replacement

Filter Cartridge Replacement Guide

Guidance on replacing filter cartridges and recommended schedules.

Filter Change Procedure

Step-by-step instructions for safely changing the filter cartridges.

Faucet Installation and Parts

Troubleshooting Common Issues

Taste or Odor Problems

Rotten Egg Odor

Low Water Pressure

Provides solutions for issues causing low water pressure at the outlet.

Warranty Information

Limited Lifetime Warranty Terms

Details the warranty coverage, limitations, and conditions for the filter housing and cartridges.

Performance Data and Certifications

Contaminant Reduction Data

Tables detailing tested contaminant reduction levels against NSF/ANSI standards.

System Specifications and Notes

Rain Soft Hydrefiner II Specifications

General IconGeneral
BrandRain Soft
ModelHydrefiner II
CategoryWater System
LanguageEnglish

Related product manuals