System Start Up
1. Turn on the Cold Water Supply
• Allow water to enter the system and let it stand for 5 minutes.
2. Check for Leaks
• If a leak is present, make the necessary repairs.
3. Flush the System
• Open the new faucet and allow the water to flow for 10 minutes.
This process will flush the disinfectant and carbon fines from the
system.
4. Cover Assembly
• Place Cover onto Hydrefiner II and ensure tubing is correctly
secure. (See Figure 7)
6
Figure 7
OUTLET 3/8 TUBE INSTALLAT I ON
INLET 3/8 TUBE INSTALLATI ON
F
R
OM
I
N
LE
T
FLOW
RESTRICTOR
T
O
F
A
U
C
E
T
S
H
U
T
O
F
F
V
A
L
V
E
Figure 6
To Next Page
Loading...
