Part 2: Introduction to Control Software
6
1. Start page of the software
2. Home page
Encrypt data, view the model and version number of the machine and the software; master volume
adjustment, main audio source selection, storage and selection of 6 preset sound effects, switch to
advanced interface.
3. Delay page
Delay setting for the output channel, click “DELAY” button for delay setting.
4. Channel page
Adjust output channel volume, phase and mute the channel; set types, frequencies and slopes of
high-pass and low-pass filters; joint tuning for output channels.
5. Mixer interface
4 high-level, 2 AUX, bluetooth left and bluetooth right mixing selection and adjustment, adjustment
range: 0~100.
6. EQ page
Adjust EQ curve (gain, Q value and frequency); pass through, restore and reset equalizer, joint tuning
or solo tuning switch.