8
Ordering & Tech Support: 877-272-6747 www.RainbowEcoscience.com
General Care & Storage
1. 2.
Weekly Cleaning
First complete daily cleaning steps on previous page
Remove the reservoir and remove the cap,
cap gasket and filter and let air dry.
3.
Add silicone based lubricant to valve and
place reservoir mouth down for air drying
process.
Remove battery from the device.
4. 5.
Lubricate valves in
the device (female
and male valve on pump
inlet).
Place in a controlled indoor enviroment.
After Heavy Use
Follow all cleaning and lubrication protocols to maximize longetivity of all rubber seals and components.
Season Wrap Up/Long-Term Storage Cleaning
1.
2.
Complete daily
and weekly
steps above,
increase water
to 500 ml total
for rinsing.
3.
Add lubricant to valve and place
reservoir mouth down to allow for
air drying.
Make sure device is rinsed out and emptied of all moisture,
allow air drying for 24 hrs before storing.
Continued on next page »
LUBRICANT
LUBRICANT
LUBRICANT
To Next Page
Loading...