Rainbow Quantum - Quantum Instruction for Use; Set up Your New Device; Starting the Device; Priming the Device

Instructions For Use
I.
Start by charging battery for at least 24
hours before use.
1.
Connect floating tee to the device by inserting
one end of the coiled tubing into the ball valve
on the back of the injection tee handle.
2.
Connect the other end of the
tube into the straight push to
connect fitting on the side of
the device.
3.
Set Up Your New Device
2
Ordering & Tech Support: 877-272-6747 www.RainbowEcoscience.com
II.
Starting The Device
1.
Insert fully charged battery, display will automatically turn on.
2.
Device will be in ‘injection mode’ setting.
III.
Priming The Device
1.
Make sure reservoir is fully locked into position in device and fill
the reservoir with product.
2.
After start up, press the left or right button to select
prime mode.