www.raisecom.com User Manual
9
Chapter 5 Precautions
Only trained and qualified personnel should install, maintain, or install the parts of
ISCOM2128EA-MA. The device must be installed in a place where temperature and humidity can be
controlled, meanwhile consider the electronic conductivity of surrounding materials. Extreme
moisture may result in short circuit, and if too dry there may be fire. So there must be a suitable
environment for the device.
The power supply must be grounded to discharge static.
There must be some space between device and the near electrical equipments.
We recommend that outside device routing intersect with live wire to avoid long paralleling.
Follow the guide strictly when installing.
Do not install the device when your hands are wet or with a lot of sweat.
Do not rebuild the device mechanically and electrically.
To Next Page
Loading...
Need help?
General
