RAM 1500 2012 - Rear Lamp Bar ID Marker (Dual Rear Wheels) - if Equipped; Maintaining Your Vehicle

3. Pull the bulb straight from it’s socket and replace.
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄ 4 turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
668 MAINTAINING YOUR VEHICLE