EasyManua.ls Logo

RAM Chassis CAB 2018 - Display Messages

RAM Chassis CAB 2018
527 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicles Not Equipped With Passive Entry
1. Without pushing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine).
2. Push and release the down arrow button to scroll
downward through the main menu to “Vehicle Info.”
3. Push and release the right arrow button to access the
“Vehicle Info” screen then scroll up or down to select
“Oil Life.”
4. Push and hold the right arrow button to select “YES” by
pushing the right arrow then push and release the right
arrow button to select reset of the Oil Life to 100%.
5. Push and release the up arrow button to exit the
instrument cluster display screen.
NOTE: If the indicator message illuminates when you start
the vehicle, the Oil Life indicator system did not reset. If
necessary, repeat this procedure.
Display Messages
Front Seatbelts Unbuckled
Driver Seatbelt Unbuckled
Passenger Seatbelt Unbuckled
Service Airbag System
Traction Control Off
Washer Fluid Low
Oil Pressure Low
Oil Change Due
Fuel Low
Service Antilock Brake System
Service Electronic Throttle Control
Service Power Steering
Cruise Off
Cruise Ready
Cruise Set To XXX MPH
Tire Pressure Screen With Low Tire(s) “Inflate Tire To
XX”
Tire Pressure Information System (TPIS)
Service Tire Pressure System
Parking Brake Engaged
Brake Fluid Low
136 GETTING TO KNOW YOUR INSTRUMENT PANEL

Table of Contents

Related product manuals