RAM Promaster 2014 - Page 143

NOTE: The setting can be increased or decreased by
5 mph or km/h each time the UP/DOWN button is
pressed for speed settings above 20 mph (32 km/h). To
increase or decrease the set speed rapidly, press and hold
the UP/DOWN button. Save the setting by briefly press-
ing the button when you approach the required setting.
• Briefly press the MODE button to go back to the menu
screen, or press and hold the MODE button (approxi-
mately one second) to go back to the main screen
without storing the settings.
To cancel the setting, proceed as follows:
1. Briefly press the MODE button. “On” will flash on the
display.
2. Press the DOWN
button. “Off” will flash on the
display.
3. Briefly press the MODE button to go back to the menu
screen, or press and hold the MODE button (approxi-
mately one second) to go back to the main screen
without storing the settings.
Buzzer Volume (Adjusting The Failure/Warning
Buzzer Volume)
With this function the volume of the buzzer accompany-
ing any failure/warning indication can be adjusted to
one of seven volume levels.
To adjust the volume proceed as follows:
1. Briefly press the MODE button. The previously set
volume “level” will flash on the display.
2. Press the UP
or DOWN button for setting.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 141