Distance Traveled
This value shows the distance covered since the last reset.
Average Consumption
This value shows the approximate average consumption
since the last reset.
Instant Consumption
This indicates the fuel consumption. The value is con-
stantly updated. The message “----” will appear on the
display if the car is parked with the engine running.
Average Speed
This value shows the vehicle’s average speed as a func-
tion of the overall time elapsed since the last reset.
Travel Time
This value shows the time elapsed since the last reset.
Personal Settings (Customer-Programmable
Features)
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
To set the speed limit, proceed as follows:
1. Briefly press the MODE button. The display will show
the message (Speed Beep).
2. Press the UP
or DOWN button to select speed
limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
MODE button to display the presently set activation
speed. Pressing the UP
or DOWN buttons
selects the speed limit. Press MODE to confirm selec-
tion.
140 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
