Rancilio Silvia PID Kit - Installation Tools Required

Silvia PID Installation Guide
Copyright © 2006, 2008 MLG Properties, LLC
Tools Required
Tool Used for: Comments
Philips head
screwdriver
(medium size
tip)
• Screws that fasten Silvia’s enclosure
panels
• Wiring terminals on 1/16 DIN size
digital controllers
• Screw used in cable clamp assembly
• Screw terminals on some SSR’s
Flat blade
screwdriver
(medium size)
• Screw that secures brew thermostat,
and new thermocouple, on Silvia’s
boiler
• Assisting in the removal of quick
disconnect electrical connections
• Screw terminals on some SSR’s
Flat blade
screwdriver
(small size)
• Wiring terminals on 1/32 DIN size
digital controllers
• Assistance in installing rubber
grommets
Needle nose
pliers
• Holding and picking up small
screws
• Trimming plastic wire ties
Optional – could use
tweezers instead
7mm deep well
socket
• 4 mm nut on new SSR
Contact MLG to
borrow one of these if
you need one
Scissors
• Trimming plastic wire ties
• Trimming cable loom
Optional
Wire cutters
• Trimming plastic wire ties
Optional