R&S FSV3044 - Page 1023

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1023User Manual 1178.8520.02 ─ 01
Usage: Query only
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:SPAN <Span>
This command defines the bandwidth around the delta marker position.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Span> Frequency. The maximum span depends on the marker position
and R&S FSV/A model.
*RST: 5% of current span
Default unit: Hz
Manual operation: See " Span " on page 456
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer[:STATe]
<State>
This command turns delta markers for band power measurements on and off.
If neccessary, the command also turns on a reference marker.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation: See " Band Power Measurement State " on page 455
See " Switching All Band Power Measurements Off "
on page 456
14.8.3.12 n dB Down Marker
The following commands control the n dB down markers.
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown.......................................................... 1024
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?......................................1024
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor?...........................................1025
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?............................................. 1025
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe................................................ 1026
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:TIME?................................................1026
Analyzing Measurements (Basics)