Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1190User Manual 1178.8520.02 ─ 01
Supported 89600 commands
*STB?
*TRG
*TST?
*WAI
:CALibration:AUTO OFF|ON|ALERt
:CALibration:TCORrections AUTO|ON|OFF
:CONFigure:WAVeform
:DIAGnostic:EABY ON|OFF
:DIAGnostic:LATCh:VALue <numeric>
:DIAGnostic:LATCh:SELect <string>
:DISPlay:ANNotation:TITLe:DATA <string>
:DISPlay:ENABle OFF|ON
:DISPlay:WINDow:TRACe:Y:[SCALe]:PDIVision <numeric>
:DISPlay:WINDow:TRACe:Y:[SCALe]:RLEVel <numeric>
:DISPlay:WINDow:TRACe:Y:[SCALe]:RLEVel:OFFSet <numeric>
:FORMat:BORDer NORMal|SWAPped
:FORMat[:DATA] ASCii|REAL|UINT|MATLAB,<numeric>
:INITiate:CONTinuous OFF|ON
:INITiate[:IMMediate]
:INSTrument:CATalog?
:INSTrument:NSELect <numeric>
:MMEMory:CATalog? <dir_name>
:MMEMory:COPY <‘file_name1’>,<‘file_name2’>
:MMEMory:DATA <‘file_name’>,<definite_length_block>
:MMEMory:DELete <‘file_name’>
:MMEMory:LOAD:STATe 1,<‘file_name’>
:MMEMory:LOAD:TRACe 1,<‘file_name’>
:MMEMory:MDIRectory <‘dir_name’>
:MMEMory:MOVE <‘file_name1’>,<‘file_name2’>
:MMEMory:STORe:STATe 1,<‘file_name’>
:MMEMory:STORe:TRACe <numeric>,<‘file_name’>
:READ:WAVform?
[:SENSe]:FREQuency:CENTer <numeric>
Emulating Other Instruments' Commands
To Next Page
Loading...
