Common Measurement Settings
R&S
®
FSVA3000/ R&S
®
FSV3000
395User Manual 1178.8520.02 ─ 01
8.6.1.2 Trigger Settings
Access: "Overview" > "Trigger/Gate"
External triggers from one of the Trigger Input / Output connectors on the R&S FSV/A
are configured in a separate tab of the dialog box.
See Chapter 8.2.8, "Trigger Input/Output Settings", on page 355
For step-by-step instructions on configuring triggered measurements, see Chap-
ter 8.6.1.4, "How to Configure a Triggered Measurement", on page 401.
Preview ...................................................................................................................... 396
└ Frequency ....................................................................................................396
└ RBW .............................................................................................................396
└ Sweep Time.................................................................................................. 396
Trigger Source ............................................................................................................396
└ Free Run ......................................................................................................397
└ External Trigger 1/2...................................................................................... 397
└ Video ............................................................................................................397
└ IF Power .......................................................................................................398
└ Power Sensor .............................................................................................. 398
└ Time ............................................................................................................. 398
Trigger and Gate Configuration
To Next Page
