R&S FSVA3030 - Page 1117

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1117User Manual 1178.8520.02 ─ 01
Remote commands exclusive to general display settings
DISPlay:ANNotation:CBAR............................................................................................1117
DISPlay:ANNotation:FREQuency................................................................................... 1117
DISPlay:SBAR[:STATe]................................................................................................. 1117
DISPlay:SKEYs[:STATe]................................................................................................ 1117
DISPlay:TBAR[:STATe]..................................................................................................1118
DISPlay:TOUChscreen[:STATe]......................................................................................1118
DISPlay[:WINDow<n>]:TIME......................................................................................... 1118
DISPlay[:WINDow<n>]:TIME:FORMat............................................................................ 1119
SYSTem:DISPlay:FPANel[:STATe]..................................................................................1119
DISPlay:ANNotation:CBAR <State>
This command hides or displays the channel bar information.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:ANN:CBAR OFF
Manual operation: See " Channel Bar " on page 570
DISPlay:ANNotation:FREQuency <State>
This command turns the label of the x-axis on and off.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:ANN:FREQ OFF
Manual operation: See " Diagram Footer (Annotation) " on page 570
DISPlay:SBAR[:STATe] <State>
This command turns the status bar on and off.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:SBAR:OFF
Manual operation: See " Status Bar " on page 570
DISPlay:SKEYs[:STATe] <State>
This command turns the softkey bar on and off.
Configuring the R&S
FSV/A