Need help?Do you have a question about the R&S NRPxxS Series and is the answer not in the manual?
General| Power Range | -70 dBm to +20 dBm (dependent on model) |
|---|---|
| Display | None (requires external display via interface) |
| Battery Life | Not applicable (externally powered) |
| Supply Voltage | 5 V DC (via USB) |
| Interface | USB |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
Crucial safety guidelines and warnings for operating the R&S NRPxxS(N) power sensors.
Essential environmental and operational parameters to ensure accurate measurements and device safety.
Methods for establishing communication between the power sensor and a computer.
Detailed steps for connecting the power sensor to a computer via USB.
Guide for establishing network connectivity for LAN-enabled power sensors.
Procedures for connecting LAN sensors using PoE switches or injectors.
Overview of the R&S NRP Toolkit, its components, versions, and installation procedures.
Specific guidance for installing the R&S NRP Toolkit on Windows, including component selection.
Using the integrated web interface for sensor configuration and measurement without software installation.
Methods and concepts for controlling the power sensor remotely via various interfaces.
Explanation of the web UI's main dialog, including title bar, navigation, and parameter panes.
Description of various measurement modes and their associated parameters.
Details the process and methods for updating the power sensor's firmware, including warnings.
Covers methods for controlling measurement flow, including initiation, termination, and triggering.
Detailed explanation of parameters for different measurement modes (Continuous Average, Burst, Timeslot, Trace).
Common parameters for measurement setup, including averaging, frequency, and exclusion time settings.
Overview of communication interfaces (USB, Ethernet) and protocols for remote control.
Explanation of SCPI command syntax, parameters, queries, and structure.
To Next Page
