R&S NRPxxS Series - Operating Concepts; R&S NRP Toolkit

Operating Concepts
R&S
®
NRPxxS(N)
27User Manual 1177.5079.02 ─ 10
5 Operating Concepts
For operating the power sensor, you can choose from various possibilities:
●
Chapter 5.2, "Browser-Based User Interface", on page 30
●
Chapter 5.3, "Remote Control", on page 32
●
Chapter 5.4, "R&S NRPV", on page 32
●
Chapter 5.5, "R&S Power Viewer", on page 34
●
Chapter 5.6, "R&S Power Viewer Mobile", on page 37
●
Chapter 5.7, "R&S NRX", on page 37
●
Chapter 5.8, "R&S NRP2", on page 38
5.1 R&S NRP Toolkit
Before you start using the power sensor, it is recommended to install the R&S NRP
Toolkit.
The R&S NRP Toolkit is the basic software package that supplies low-level drivers and
tools for all power sensors. The components of the R&S NRP Toolkit depend on the
operating system.
5.1.1 Versions and Downloads
The R&S NRP Toolkit is available for the Microsoft Windows operating systems listed
under Chapter 5.1.2, "System Requirements", on page 27, Linux distributions and
MacOSX. Several R&S NRP Toolkit versions are available on your documentation CD-
ROM.
The latest version for Windows is available at www.rohde-schwarz.com/software/nrp-
toolkit.
To obtain an R&S NRP Toolkit for an operating system other than Microsoft Windows,
contact the Rohde & Schwarz customer support: customersupport@rohde-
schwarz.com
5.1.2 System Requirements
Hardware requirements:
●
Desktop computer or laptop, or an Intel-based Apple Mac
●
LAN interface and equipment for setting up a LAN connection.
See Chapter 3.5.2, "Setting Up a LAN Connection", on page 16.
R&S NRP Toolkit