Operating Concepts
R&S
®
NRPxxS(N)
37User Manual 1177.5079.02 ─ 10
5.6 R&S Power Viewer Mobile
The R&S Power Viewer Mobile extends the functionality of the R&S Power Viewer to
Android-based devices, such as a smartphone and tablets.
You can download the R&S Power Viewer Mobile free of charge from the Google Play
Store.
The 1MA215 "Using R&S
®
NRP Series Power Sensors with Android
TM
Handheld Devi-
ces" application note gives a detailed description on installation and features of the
R&S Power Viewer Mobile. The application note is provided on the documentation CD-
ROM.
5.7 R&S NRX
In a measurement, the R&S NRX uses all sensor-dependent measurement functions
and displays the results. Thus, you can configure both the measurement and the
power sensor.
Required equipment
●
R&S NRPxxS(N) power sensor
●
R&S NRP‑ZK8 to connect the sensor to the R&S NRX
●
R&S NRX
Setup
NRP
3-Path Diode Power Sensor
MHz to GHz, 100 pW to 200 mW (−70 dBm to +23 dBm)
SMART SENSOR TECHNOLOGY
Figure 5-4: Setup with an R&S NRX base unit
1 = Signal source
2 = R&S NRPxxS(N) power sensor
3 = Host interface connector
4 = R&S NRP‑ZK8
5 = Sensor input connector of the R&S NRX
6 = R&S NRX base unit
Incorrectly connecting/disconnecting the R&S NRPxxS(N) power sensors can damage
the power sensors or lead to erroneous results.
Ensure that you connect/disconnect your power sensor as described in Chapter 3,
"Preparing for Use", on page 11.
R&S NRX
To Next Page
Loading...
