Measurements
R&S
®
RTO
174User Manual 1316.0827.02 ─ 06
Meas 1/2/3/4/5/6/7/8
Selects one of the eight available measurements.
State
Enables long term measurement for a defined number of measurement points or a speci-
fied time.
SCPI command:
MEASurement<m>:LTMeas[:STATe] on page 569
Continuous auto scale
Performs an automatical vertical scaling whenever the waveform does not fit in the dia-
gram. Use this setting altenatively to the single "Auto scale" and the manual settings
"Vertical scale" and "Vertical offset".
Auto scale
Enables automatic vertical scaling so that the scaling is adapted to the current measure-
ment results automatically during the long term measurement period.
SCPI command:
MEASurement<m>:VERTical:AUTO on page 568
Vertical scale
Defines the vertical scaling per division for long term measurement period and the sta-
tistics histogram.
SCPI command:
MEASurement<m>:VERTical:SCALe on page 568
Automatic Measurements
To Next Page
Loading...
