R&S RTO - Page 2

This manual describes the following R&S
®
RTO models:
●
R&S
®
RTO1002 (1316.1000K02)
●
R&S
®
RTO1004 (1316.1000K04)
●
R&S
®
RTO1012 (1316.1000K12)
●
R&S
®
RTO1014 (1316.1000K14)
●
R&S
®
RTO1022 (1316.1000K22)
●
R&S
®
RTO1024 (1316.1000K24)
●
R&S
®
RTO1044 (1316.1000K44)
In addition to the base unit, the following options are described:
●
R&S
®
RTO-K1, I²C and SPI (1304.8511.02)
●
R&S
®
RTO-K2, UART (1304.8528.02)
●
R&S
®
RTO-K3, CAN and LIN (1304.8534.02)
●
R&S
®
RTO-K4, FlexRay (1304.8540.02)
●
R&S
®
RTO-K301 Tek DPO7000 Emulation mode (3127.2981.02)
●
R&S
®
RTO-B1, MSO (1304.9901.03)
●
R&S
®
RTO-B4, OCXO (1304.8305.02)
The firmware of the instrument makes use of several valuable open source software packages. For information, see the "Open Source
Acknowledgement" on the user documentation CD-ROM (included in delivery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.
© 2012 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
E-mail: info@rohde-schwarz.com
Internet: http://www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
The following abbreviations are used throughout this manual: R&S
®
RTO is abbreviated as R&S RTO.