Maintenance
R&S
®
RTO
388User Manual 1316.0827.02 ─ 06
Selftest
Starts the selftest.
SCPI command:
*TST on page 426
State
Shows the summary result of the selftest: Pass or Fail.
SCPI command:
DIAGnostic:SERVice:STST:STATe on page 771
Result
Opens a log file with detailed information on the selftest steps and hardware components
operation. In case you require support, you may be asked to provide this information.
Reference for Maintenance Settings
To Next Page
Loading...
