R&S RTO - Page 465

Remote Control
R&S
®
RTO
449User Manual 1316.0827.02 ─ 06
Return values:
<SerialNo> Serial number in a string.
Usage: Query only
PROBe<m>:SERVice:STESt:RUN
Starts the selftest of the probe connected to the specified channel input.
Suffix:
<m>
.
1..4
Selects the input channel.
Usage: Event
PROBe<m>:
SERVice:STESt:STATus?
Queries the status of a probe selftest for the specified channel input.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<SelfTestStatus> PSSD | FAILed | UNDefined
When the selftest has finished, the status is passed or failed, oth-
erwise it is undefined.
*RST: UNDefined
Usage: Query only
PROBe<m>:SERVice:STESt[:RESult]?
Queries the result of a probe selftest for the specified channel input.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<SelftestResult> The string contains the pass/fail results of all steps of the probe
selftest.
Usage: Query only
PROBe<m>:SERVice:FW:PATH <FlashPath>
Indicates the location of the firmware update package.
Suffix:
<m>
.
1..4
Selects the input channel.
Command Reference