R&S RTO - Page 511

Remote Control
R&S
®
RTO
495User Manual 1316.0827.02 ─ 06
Setting parameters:
<Name> color table
Usage: Setting only
DISPlay:COLor:PALette:COUNt?
Queries the number of configured color maps.
Usage: Query only
DISPlay:COLor:PALette:POINt:ADD <PaletteName>
Appends a new row at the end of the color table.
Setting parameters:
<PaletteName> color table
Usage: Setting only
DISPlay:COLor:PALette:POINt:INSert <PaletteName>, <PointIndex>
Inserts the entry at the specified index in the color table.
Setting parameters:
<PaletteName> color table
<PointIndex> row number in the color table
Usage: Setting only
DISPlay:COLor:PALette:POINt:REMove <PaletteName>, <PointIndex>
Removes the entry with the specified index from the color table.
Setting parameters:
<PaletteName> color table
<PointIndex> row number in the color table
Usage: Setting only
DISPlay:COLor:PALette:POINt[:VALue] <ColorTableName>,
<ColorTableColorPointIdx>,<Position>, <Color>
DISPlay:COLor:PALette:POINt[:VALue]? <ColorTableName>,
<ColorTableColorPointIdx>
Inserts a new entry or queries the specified entry in the specified color table.
Command Reference