EasyManua.ls Logo

R&S RTO - Page 594

R&S RTO
829 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control
R&S
®
RTO
578User Manual 1316.0827.02 ─ 06
CALCulate:MATH<m>:FFT:GATE:RELative:STARt...........................................................585
CALCulate:MATH<m>:FFT:GATE:RELative:STOP............................................................585
CALCulate:MATH<m>:FFT:GATE:SHOW........................................................................585
CALCulate:MATH<m>:FFT:GATE:ZCOupling...................................................................586
CALCulate:MATH<m>:FFT:GATE[:STATe].......................................................................586
CALCulate:MATH<m>:FFT:MAGNitude:LEVel..................................................................586
CALCulate:MATH<m>:FFT:MAGNitude:RANGe...............................................................586
CALCulate:MATH<m>:FFT:MAGNitude:SCALe................................................................587
CALCulate:MATH<m>:FFT:PHASe:SCALe.......................................................................587
CALCulate:MATH<m>:FFT:PHASe:SUPPression..............................................................587
CALCulate:MATH<m>:FFT:PHASe:THReshold.................................................................588
CALCulate:MATH<m>:FFT:PHASe:UNWRap...................................................................588
CALCulate:MATH<m>:FFT:STARt <StartFreq>
Defines the start frequency of the displayed frequency span.
Suffix:
<m>
.
1..4
math waveform
Parameters:
<StartFreq> start frequency
Range: 0 to 5E+9
Increment: 1
*RST: 2E+9
Default unit: Hz
CALCulate:MATH<m>:FFT:STOP <StopFreq>
Defines the stop frequency of the displayed frequency span.
Suffix:
<m>
.
1..4
math waveform
Parameters:
<StopFreq> stop frequency
Range: 0 to 5E+9
Increment: 1
*RST: 2E+9
Default unit: Hz
CALCulate:MATH<m>:FFT:WINDow:TYPE <WindowType>
Windowing helps minimize the discontinuities at the end of the measured signal interval
and thus reduces the effect of spectral leakage, increasing the frequency resolution.
Command Reference

Table of Contents

Related product manuals