R&S RTO - Page 654

Remote Control
R&S
®
RTO
638User Manual 1316.0827.02 ─ 06
Usage: SCPI confirmed
SEARch:RESDiagram:SHOW <SearchName>,<ShowSearchWind>
SEARch:RESDiagram:SHOW? <SearchName>
If enabled, a zoom window is displayed for the currently selected search result. The zoom
area is indicated in the diagram that displays the source waveform of the search.
Parameters:
<ShowSearchWind> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:
RESDiagram:VERT:ABSolute:POSition <SearchName>,<Position>
SEARch:RESDiagram:VERT:ABSolute:POSition? <SearchName>
Defines the y-value of the centerpoint of the zoom area.
Parameters:
<Position> Range: -100E+24 to 100E+24
Increment: 0.01
*RST: 0.01
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:RESDiagram:VERT:ABSolute:SPAN <SearchName>,<Span>
SEARch:RESDiagram:VERT:ABSolute:SPAN? <SearchName>
Defines the height of the zoom area.
Parameters:
<Span> Range: 0 to 100E+24
Increment: 0.01
*RST: 0.01
Parameters for setting and query:
<SearchName> Search definition
Usage: SCPI confirmed
SEARch:RESDiagram:VERT:MODE <SearchName>,<Mode>
SEARch:RESDiagram:VERT:MODE? <SearchName>
Defines whether absolute or relative values are used to specify the y-axis values.
Command Reference