R&S RTO - Page 660

Remote Control
R&S
®
RTO
644User Manual 1316.0827.02 ─ 06
Usage: Asynchronous command
BUS<m>[:STATe] <State>
Switches the protocol display on or off.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
BUS<m>:
LABel <Label>
Defines a label to be displayed with the bus.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<Label> String containing the label text.
Usage: Asynchronous command
BUS<m>:RESult <ShowResultTable>
Opens a table with decoded data of the serial signal. The function requires the option for
the analyzed protocol.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ShowResultTable> ON | OFF
*RST: OFF
Usage: Asynchronous command
16.2.14.2 I²C
● Configuration.........................................................................................................645
● Trigger...................................................................................................................647
● Decoding Results (Option R&S RTO-K1).............................................................654
● Translation (Option R&S RTO-K1)........................................................................662
Command Reference