R&S RTO - Page 674

Remote Control
R&S
®
RTO
658User Manual 1316.0827.02 ─ 06
Usage: Query only
BUS<m>:I2C:FRAMe<n>:ASTart?
Returns the start time of the address for the indicated frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<AddressStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:I2C:FRAMe<n>:RWBStart?
Returns the start time of the R/W bit
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<RWBitStart> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:I2C:FRAMe<n>:STATus?
Returns the overall state of the frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Command Reference