R&S RTO - Page 753

Remote Control
R&S
®
RTO
737User Manual 1316.0827.02 ─ 06
<n> *
Selects the frame.
Return values:
<FrameCRCstate> OK | UVAL | INSufficient
OK: the CRC is valid.
UVAL: unexpected value
INSufficient: the frame is not completely contained in the acquisi-
tion. The decoded part of the frame is valid.
*RST: OK
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:FCValue?
Returns the cyclic redundancy check code of the frame CRC.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameCRCvalue>
To set the value format, use FORMat:BPATtern on page 427.
The values below – range, increment and default – are decimal
values.
Range: 0 to 16777215
Increment: 1
*RST: 0
Usage: Query only
Translation
BUS<m>:SHOWtrans <UseTranslation>
Activates the protocol translation file to be used for decoding.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<UseTranslation> ON | OFF
*RST: OFF
Usage: Asynchronous command
Firmware/Software: FW 1.35
Command Reference