R&S RTO6 - Rear Panel

Instrument tour
R&S
®
RTO6
28Getting Started 1801.6670.02 ─ 03
[Aux Out]
Output of the internal calibration signal, if the signal is configured to external des-
tination.
5.2 Rear panel
The rear panel of the R&S RTO6 is shown in Figure 5-2.
Figure 5-2: Rear panel of R&S RTO6
1 = USB device connector, type B
2 = USB connectors, type A
3 = LAN connector
4 = HDMI connector for external monitor
5 = AC power supply connector and main power switch
6 = DisplayPort connector
7 = Option slot for R&S RTO6-B6 (waveform generator, shown in figure) or R&S RTO6-B7
(pulse source)
Rear panel