R&S RTO6 - Setting the Display Language

Setting up the instrument
R&S
®
RTO6
72Getting Started 1801.6670.02 ─ 03
7.2 Setting the display language
You can change the language in which the dialog boxes, result boxes and other
screen information is displayed. A reboot of the instrument is not necessary.
1. Open the "Menu" > "Settings" > "System" dialog.
2. Select the "Localization" tab.
3. Tap the "Language" button. The button shows the current language.
4. Select the required language.
The instrument changes the language after a few seconds.
Setting the display language