R&S SMB100A Release Notes

R&S
®
SMB100A Information on the current version and history
Release Notes 1234.5678.02 - 01 4
The R&S®SMB100A provides a continuously growing number of device emulations.
The current emulation set is described in chapter 2 “Information on Remote
Emulations".
1.1 Version 5.00.116.88
Released September 2022
Improvements
Version
Improvements
980891
List-Mode "Extern Step" not working on some instruments
380954
Unintended settings conflict at particular level settings when attenuator is fixed and AM
is enabled
978734
Reference Oscillator: On instruments with TCXO the factory adjustment value is not
saved properly
Known issues
Version
Known Issues
12845
Sometimes the SMZ multiplier is not recognized during power on. Workaround:
Power up SMB before connecting or powering the SMZ
947017
Pulse Generator: Trigger mode Single is triggered by external trigger too.
978836
Wrong serial number of OCXO module in hardware config dialog, too low by 65536
1.2 Version 5.00.116.85
Released May 2022
New functionality
Version
Functions
Information on
Remote
Emulations
Consecutive identical messages are bundled in info history and SCPI message queue
to prevent both from being flooded and squeezing out other messages.

R&S SMB100A Specifications

General

Brand	R&S
Model	SMB100A
Category	Inverter
Language	English