R&S ZNA26 - Page 1012

Command reference
R&S
®
ZNA
1012User Manual 1178.6462.02 ─ 20
CALCulate:PARameter:DELete:ALL...............................................................................1012
CALCulate:PARameter:DELete:MEMory.........................................................................1012
CALCulate<Ch>:PARameter:CATalog?...........................................................................1012
CALCulate<Ch>:PARameter:CATalog:SENDed?............................................................. 1013
CALCulate<Ch>:PARameter:DEFine:SGRoup................................................................ 1013
CALCulate<Ch>:PARameter:DELete..............................................................................1014
CALCulate<Ch>:PARameter:DELete:CALL.....................................................................1015
CALCulate<Ch>:PARameter:DELete:CMEMory.............................................................. 1015
CALCulate<Ch>:PARameter:DELete:SGRoup................................................................ 1015
CALCulate<Ch>:PARameter:MEASure.......................................................................... 1016
CALCulate<Ch>:PARameter:MEASure:SENDed............................................................. 1017
CALCulate<Ch>:PARameter:SDEFine........................................................................... 1017
CALCulate<Ch>:PARameter:SDEFine:SENDed..............................................................1021
CALCulate<Ch>:PARameter:SELect..............................................................................1021
CALCulate:PARameter:DELete:ALL
Deletes all traces in all channels of the active recall set, including the default trace
Trc1 in channel 1. The manual control screen shows "No Trace".
Example:
See CALCulate<Ch>:PARameter:DELete
Usage: Event
Manual operation: See "Delete Trace" on page 388
CALCulate:PARameter:DELete:MEMory
Deletes all memory traces in all channels.
Usage:
Event
Manual operation: See "Delete All Mem" on page 396
CALCulate<Ch>:PARameter:CATalog?
Returns the trace names and measurement parameters of all traces assigned to a par-
ticular channel.
The result is a string containing a comma-separated list of trace names and measure-
ment parameters, e.g. 'CH4TR1,S11,CH4TR2,S12'. The measurement parameters
are returned according to the naming convention of CALCulate<Ch>:PARameter:
SDEFine. The order of traces in the list reflects their creation time: The oldest trace is
the first, the newest trace is the last trace in the list.
Suffix:
<Ch>
.
Channel number. If unspecified the numeric suffix is set to 1.
SCPI command reference