Command reference
R&S
®
ZNA
1136User Manual 1178.6462.02 ─ 20
Setting parameters:
<Filename> String parameter containing the file name. If no path is specified,
the file is stored to the directory
C:\Users\Public\Documents\ZNA\Report; the extension
*.zip is appended automatically.
*RST: n/a
Example:
DIAG:DEV:STAT 'report_16032011_1120'
Generate a report and store it to
C:\Users\Public\Documents\ZNA\Report\
report_16032011_1120. Use the MMEMory... commands to
rename, move, or delete the file.
Usage: Setting only
Manual operation: See "Save..." on page 804
DIAGnostic:DUMP:SIZE
<DumpSize>
Determines the level of detail and hence the size of the dump files created in case of
firmware exceptions.
Parameters:
<DumpSize> NONE | MINI | NORMal | LARGe | FULL
Either disables dump file creation (NONE) or determines the
level of detail.
Manual operation: See "Error Dump Type" on page 796
DIAGnostic:PRODuct:OPTion:INFO? <Option>, <Detail>
Queries a property of an installed software option, identified by its name.
Query parameters:
<Option> Option name, e.g. 'ZNA-K2'.
<Detail> DESCription | TYPE | ACTivation | EXPiration | KEY
You can query for an option's DESCription, its KEY and key
TYPE, and its ACTivation and EXPiration date (if applicable).
Example:
DIAGnostic:PRODuct:OPTion:INFO? 'ZNA-K2',DESC
On a R&S ZNA this returns 'Time Domain Analysis' (if
installed).
Usage: Query only
Manual operation: See "Software Option Info" on page 807
DIAGnostic:SERVice:RFPower <Boolean>
Turns the internal source power at all ports and the power of all external generators on
or off. This command is equivalent to OUTPut<Ch>[:STATe] .
SCPI command reference
To Next Page
Loading...
