Command reference
R&S
®
ZNA
1162User Manual 1178.6462.02 ─ 20
Setting parameters:
<MainLayoutId> Integer value 1, 2 ...
Current number of main layout, as defined by DISPlay:
LAYout:DEFine.
<DiagramNumber> Integer value 1, 2 ...
Diagram number in the main layout
<SubLayoutId> Integer value 1, 2 ...
Current number of sub-layout, as defined by DISPlay:
LAYout:DEFine.
*RST: n/a
Example: See Creating diagrams
Usage: Setting only
Manual operation: See "Additional Functionality: SCPI Commands" on page 775
DISPlay:LAYout:OVERlay
Displays all traces of the active recall set in a single diagram, which is maximized to
occupy the whole screen.
Usage:
Event
Manual operation: See "Overlay All" on page 772
DISPlay:LAYout:SPLit
Creates a separate diagram for each trace in the active recall set and automatically
arranges those diagrams in the diagram area. Existing diagrams are deleted.
Usage:
Event
Manual operation: See "Split All" on page 772
DISPlay:MENU:KEY:ACTion:CATalog?
Displays the identifiers of the available dialog opener actions as a comma-separated
list of strings.
Use DISPlay:MENU:KEY:EXECute to open one of the dialogs.
Usage:
Query only
DISPlay:MENU:KEY:EXECute <MenuKey>
Opens the dialog identified by <MenuKey>.
Use DISPlay:MENU:KEY:ACTion:CATalog? to display the available opener IDs.
SCPI command reference
To Next Page
Loading...
