R&S ZNA26 - Page 1232

Command reference
R&S
®
ZNA
1232User Manual 1178.6462.02 ─ 20
Parameters:
<Address> String value with DLL-specific syntax and semantics. See the
docs of your DLL for details.
Parameters for setting and query:
<DllName> Name of a loaded DLL (see [SENSe:]CDLL:LIST?)
Lowercase string, without dll extension
<Task> Task type (see [SENSe:]CDLL:LIST:TASK?)
Manual operation: See "Configure Device Adress" on page 358
[SENSe<Ch>:]CDLL[:STATe]
<DllName>, <Boolean>
[SENSe<Ch>:]CDLL[:STATe]? <DllName>
Defines the state of (external) DLL <DllName>.dll in channel <Ch>.
An active DLL can provide traces or operate in permanent mode (see [SENSe<Ch>:
]CDLL:PERManent[:STATe]).
Suffix:
<Ch>
.
Channel number
Parameters:
<Boolean> ON (1)
DLL is active
OFF (0)
DLL is inactive
Parameters for setting and query:
<DllName> Name of a loaded DLL (see [SENSe:]CDLL:LIST?)
Lowercase string, without dll extension
Manual operation: See "Active" on page 356
7.3.14.4 [SENSe:]CONVerter
Commands to set up frequency converters.
[SENSe:]CONVerter:DEFinition:CATalog?
Returns a comma-separated list of the currently defined converter types.
The length of the list can be queried using [SENSe:]CONVerter:DEFinition:
COUNt?.
Return values:
<Type>
Example:
SENSe:CONVerter:DEFinition:CATalog?
returns something like
'ZVA-Z110','ZVA-Z110E','ZVA-Z140', ...
Usage: Query only
SCPI command reference