Command reference
R&S
®
ZNA
1370User Manual 1178.6462.02 ─ 20
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin:SEGMent<Seg>:STOP <Stop time of
the segment of the pulse train>
Suffix:
<Ch>
.
<Id>
<Seg>
Parameters:
<Stop time of the
segment of the pulse
train>
Manual operation: See "Segment List" on page 642
[SENSe<Ch>:]PULSe:GENerator<Id>:TRAin[:STATe] <Set pulse train active/
inactive>
Suffix:
<Ch>
.
<Id>
Parameters:
<Set pulse train
active/inactive>
Manual operation: See "Enable Pulse Train" on page 642
[SENSe<Ch>:]PULSe:GENerator<Id>:WIDTh <Width for the generated pulse>
Suffix:
<Ch>
.
<Id>
Parameters:
<Width for the
generated pulse>
Default unit: s
Manual operation: See "Pulse Delay/Pulse Width" on page 642
[SENSe<Ch>:]PULSe:GENerator<Id>[:STATe] <Period for the generated pulses>
Suffix:
<Ch>
.
<Id>
Parameters:
<Period for the
generated pulses>
SCPI command reference
To Next Page
Loading...
