Command reference
R&S
®
ZNA
1481User Manual 1178.6462.02 ─ 20
The status reporting system is also affected by other commands, see Chapter 6.5.5,
"Reset values of the status reporting system", on page 878.
Example:
STAT:PRES
Preset the status registers.
Usage: Event
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable:INTegrity[:EVENt]?
STATus:QUEStionable:INTegrity:HARDware[:EVENt]?
STATus:QUEStionable:LIMit<Lev>[:EVENt]?
These commands return the contents of the EVENt parts of the QUEStionable,
QUEStionable:INTegrity, QUEStionable:INTegrity:HARDware, and
QUEStionable:LIMit<Lev> status registers. Reading an EVENt register clears it.
Suffix:
<Lev>
.
Selects one of the two QUEStionable:LIMit registers; see
"STATus:QUEStionable:LIMit<1|2>" on page 872.
Example:
STAT:QUES:LIM1?
Query the EVENt part of the QUEStionable:LIMit1 register
to check whether an event has occurred since the last reading.
Usage: Query only
STATus:QUEStionable:CONDition?
STATus:QUEStionable:INTegrity:CONDition?
STATus:QUEStionable:INTegrity:HARDware:CONDition?
STATus:QUEStionable:LIMit<Lev>:CONDition?
Returns the contents of the CONDition part of the QUEStionable... registers.
Reading the CONDition registers is nondestructive.
Suffix:
<Lev>
.
Selects one of the two QUEStionable:LIMit registers; see
"STATus:QUEStionable:LIMit<1|2>" on page 872.
Example:
STAT:QUES:LIMit:COND?
Query the CONDition part of the QUEStionable:LIMit1 reg-
ister to retrieve the current status of the limit check.
Usage: Query only
STATus:QUEStionable:ENABle <BitPattern>
STATus:QUEStionable:INTegrity:ENABle <BitPattern>
SCPI command reference
To Next Page
Loading...
