R&S ZNA26 - Page 1501

Command reference
R&S
®
ZNA
1501User Manual 1178.6462.02 ─ 20
SYSTem:COMMunicate:RDEVice:PMETer<Pmtr>:SPCorrection[:STATe]
<Boolean>
Gets/sets the state of the built-in S-parameter correction that is available on certain
R&S®NRP-Z power sensors.
Note that this state is persistently stored on the power sensor (and NOT on the
R&S ZNA).
See Application Note 1GP70 "Using S-Parameters with R&S®NRP-Z Power Sensors"
for background information. This Application Note is available on the Rohde & Schwarz
internet at http://www.rohde-schwarz.com/appnotes/1GP70.
Suffix:
<Pmtr>
.
Number of the configured power meter.
Parameters:
<Boolean> ON | OFF
Manual operation: See "Deembed Two-Port (All Channels)" on page 822
7.3.17.2
SYSTem... (Contd.)
The following SYSTem... commands provide general instrument configurations.
SYSTem:AGC:GLOBal:METHod....................................................................................1502
SYSTem:CORRection:JOINcal...................................................................................... 1502
SYSTem:CORRection:WIZard[:IMMediate]..................................................................... 1503
SYSTem:DATE............................................................................................................ 1503
SYSTem:DFPRint?.......................................................................................................1504
SYSTem:DISPlay:BAR:HKEY[:STATe]............................................................................1504
SYSTem:DISPlay:BAR:MENU[:STATe]........................................................................... 1504
SYSTem:DISPlay:BAR:STATus[:STATe]..........................................................................1504
SYSTem:DISPlay:BAR:STOols[:STATe]..........................................................................1504
SYSTem:DISPlay:BAR:TITLe[:STATe]............................................................................ 1504
SYSTem:DISPlay:BAR:TOOLs[:STATe].......................................................................... 1504
SYSTem:DISPlay:COLor...............................................................................................1504
SYSTem:DISPlay:CONDuctances..................................................................................1505
SYSTem:DISPlay:TRACes:CCOunt............................................................................... 1505
SYSTem:DISPlay:UPDate.............................................................................................1505
SYSTem:ERRor:COUNt?..............................................................................................1506
SYSTem:ERRor[:NEXT]?..............................................................................................1506
SYSTem:ERRor:ALL?...................................................................................................1506
SYSTem:ERRor:DISPlay[:REMote]................................................................................ 1506
SYSTem:ERRor:DISPlay:INFO......................................................................................1507
SYSTem:ERRor:DISPlay:WARNings..............................................................................1507
SYSTem:ERRor:DISPlay:ERRor....................................................................................1507
SYSTem:ERRor:DISPlay:STATe.................................................................................... 1507
SYSTem:FIRMware:UPDate..........................................................................................1508
SYSTem:FPReset........................................................................................................ 1508
SYSTem:FREQuency?................................................................................................. 1508
SYSTem:HELP:HEADers?............................................................................................ 1509
SCPI command reference