R&S ZNA26 - Page 1546

Command reference
R&S
®
ZNA
1546User Manual 1178.6462.02 ─ 20
Parameters for setting and query:
<SnmpLocation> String containing SNMP location.
*RST: "" (empty string)
Example: //Return SNMP location
SYST:COMM:SNMP:LOC?
SYSTem:COMMunicate:SNMP:USM:USER <Name>, <Access>, <Level>[,
<Auth_pwd>[, <Priv_pwd>]]
This command defines a SNMP user profile.
Prerequisites for this command:
●
Select SNMPv3 (SYSTem:COMMunicate:SNMP:VERSion on page 1547).
Setting parameters:
<Name> String containing name of the user.
<Access> RO | RW
Defines the access right a user can have.
<Level> NOAuth | AUTH | PRIVacy
Defines the security level.
<Auth_pwd> String containing the authentication password.
<Priv_pwd> String containing the privacy password.
Example: //Create user profile
SYST:COMM:SNMP:VERS V123
SYST:COMM:SNMP:USM:USER 'Peter','RO','PRIV',
'1234','XYZ'
Usage: Setting only
Manual operation: See "SNMPv3 Configuration" on page 802
SYSTem:COMMunicate:SNMP:USM:USER:ALL?
This command returns the number of users and a list of all SNMP users for SNMPv3.
Prerequisites for this command:
●
Select SNMPv3 (SYSTem:COMMunicate:SNMP:VERSion on page 1547).
Return values:
<Count> Total number of registered SNMP users.
<Name> List of all user names as a comma-separated list.
Example: //Return all SNMP users
SYST:COMM:SNMP:USM:USER:ALL?
Usage: Query only
Manual operation: See "SNMPv3 Configuration" on page 802
HUMS and service date commands