R&S ZNA26 - Page 1559

Command reference
R&S
®
ZNA
1559User Manual 1178.6462.02 ─ 20
DIAGnostic:HUMS:TAGS:DELete <ID>
This command deletes a certain tag you assigned to your instrument, including its key
and value.
Setting parameters:
<ID> ID number of the tag you want to delete.
To identify the ID number, query all device tags from the system
first. For more information, see DIAGnostic:HUMS:TAGS:
ALL? on page 1558.
Example: //Delete tag
DIAG:HUMS:TAGS:DEL 0
Usage: Setting only
Manual operation: See "Add / Delete (Trash) / Delete All" on page 803
DIAGnostic:HUMS:TAGS:DELete:ALL
This command deletes all key-value tags you have assigned to the instrument.
Example:
//Delete all tags
DIAG:HUMS:TAGS:DEL:ALL
Usage: Event
Manual operation: See "Add / Delete (Trash) / Delete All" on page 803
7.4.4 Utilization commands
Using these commands you can retrieve the utilization information provided by the
R&S HUMS.
They all require software option R&S ZNA-980.
DIAGnostic:HUMS:UTILization?.................................................................................... 1559
DIAGnostic:HUMS:UTILization:ACTivity:TRACking:STATe................................................1560
DIAGnostic:HUMS:UTILization:HISTory?........................................................................1561
DIAGnostic:HUMS:UTILization:HISTory:DELete:ALL....................................................... 1561
DIAGnostic:HUMS:UTILization?
This command returns the current utilization data of the instrument.
Depending on the set data format, the queried utilization data is either displayed in XML
or JSON format. For more information about setting the data format, see
DIAGnostic:HUMS:FORMat on page 1551.
Return values:
<UtilizationData> <block_data>
Returns the current utilization data of the connected instrument
as block data.
HUMS and service date commands