GUI reference
R&S
®
ZNA
343User Manual 1178.6462.02 ─ 20
Figure 5-7: Intermodulation Setup Dialog (frequency converting DUT)
5.2.6.4 Intermodulation Measurements dialog
Allows you to select the measured quantities that are relevant for intermodulation mea-
surements.
Access: Trace – [Meas] > "Intermodulation" > "Intermod Product" | "Intercept Point" |
"Main Tone"
Background information
Refer to "Intermodulation quantities" on page 241.
Intermod Product tab
Allows you to select intermodulation products as measured quantities.
Access: Trace – [Meas] > "Intermodulation" > "Intermod Product"
Meas softtool
To Next Page
Loading...
