GUI reference
R&S
®
ZNA
369User Manual 1178.6462.02 ─ 20
●
The "Setup Frequency Converting DUT" button opens the Vector Mixer Meas setup
dialog that allows you to prepare one or more channels for Vector mixer measure-
ments.
●
The "More ..." buttons open the Frequency Converting Measurements dialog that
offers all available measurement parameters for mixer measurements. "More
Reflection & Feedthru..." opens the vector mixer measurements variant of the dia-
log, "More Waves" opens thescalar mixer measurements variant.
5.2.14.1 Vector Mixer Meas setup dialog
The "Vector Mixer Meas" dialog is an example of a Chapter 4.2.2.3, "Multi-channel
setup dialog", on page 112. It allows you to prepare one or more channels for Vector
mixer measurements (including group delay measurements).
Access:Trace – [Meas] ("Mixer Params") > "Vector Mixer Meas" > "Setup Frequency
Converting DUT"
Meas softtool
To Next Page
Loading...
