GUI reference
R&S
®
ZNA
552User Manual 1178.6462.02 ─ 20
Calibration definition table
The upper half of the "Calibrate All" dialog shows the calibration definitions of all chan-
nels. Each row contains a single calibration definition for one channel.
Tap the Add + Modify button to open the Calibration setup dialog, which allows you to
add calibration definitions or modify them. Existing definitions can be selectively
deleted.
Use the checkboxes in the "Enable" column to enable/disable the related calibration
definition. Use the ellipsis button in the "Channels" column to assign the related cali-
bration definition (also) to other channels.
Add + Modify
Opens the Calibration setup dialog that allows you to add calibration definitions and
modify existing ones.
Delete
Deletes the calibration definition that is selected in the "Calibration definition table"
on page 552.
Port table
The table in the lower half of the dialog displays the port configuration of the item
selected in the row in the Calibration definition table:
Cal softtool
To Next Page
Loading...
