GUI reference
R&S
®
ZNA
809User Manual 1178.6462.02 ─ 20
Lost Trigger Tab
Displays the lost trigger events that occurred in the current and in previous VNA ses-
sions ("lost trigger event log").
For each sweep with at least one lost trigger event, a log entry is created. The time-
stamp of an entry indicates the end time of the related sweep.
Reload Lost Trigger Log
While the "Lost Trigger" tab is open, the display is not refreshed automatically. Use
"Reload Lost Trigger Log" to reload the lost trigger log file.
Remote command:
TRIGger[:SEQuence]:LTRigger:COUNt?
Clear Lost Trigger Log
Does what it says. Also resets the lost trigger counter.
Remote command:
TRIGger[:SEQuence]:LTRigger:RESet
TRIGger[:SEQuence]:LTRigger:COUNt?
Activate Lost Trigger
Activates/deactivates tracking of lost trigger events.
Setup softtool
To Next Page
Loading...
