R&S ZNA26 - Page 930

Command reference
R&S
®
ZNA
930User Manual 1178.6462.02 ─ 20
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:CURRent?
Returns the frequencies at which the Delta-L algorithm calculates the loss-per-inch
uncertainties.
You can use the algorithms's default or custom frequencies (see CALCulate:
FMODel:DELT<Ph_pt>:FREQuencies:USEDefault).
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNA-K231
Manual operation: See "Frequencies" on page 700
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:CURRent:COUNt?
Returns at how many frequencies the Delta-L algorithm calculates the loss-per-inch
uncertainties.
Use CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:CURRent? to query the list
of frequencies.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNA-K231
Manual operation: See "Frequencies" on page 700
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:DEFault?
Returns the frequencies at which the Delta-L algorithm calculates the loss-per-inch
uncertainties per default.
You can either use the algorithms's default or custom frequencies (see CALCulate:
FMODel:DELT<Ph_pt>:FREQuencies:USEDefault).
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Query only
Options: R&S ZNA-K231
Manual operation: See "Frequencies" on page 700
CALCulate:FMODel:DELT<Ph_pt>:FREQuencies:DEFault:COUNt?
Returns the number of frequencies at which the Delta-L algorithm calculates the loss-
per-inch uncertainties per default.
SCPI command reference