R&S ZNA26 - Page 933

Command reference
R&S
®
ZNA
933User Manual 1178.6462.02 ─ 20
Manual operation: See "Frequencies" on page 700
CALCulate:FMODel:DELT<Ph_pt>:M1L:CACHe:CLEar:ALL
If the 1-length method is used (CALCulate:FMODel:DELT<Ph_pt>:METHod M1L),
the VNA firmware builds up a cache of coupon measurements (Touchstone files) in the
DeltaL\1LMeasurementCache subfolder of the user data folder
C:\Users\Public\Documents\Rohde-Schwarz\ZNA.
This command clears this cache.
Suffix:
<Ph_pt>
.
This suffix is ignored
Usage: Event
Options: R&S ZNA-K231
Manual operation: See "Clear All 1L Measurements/Clear Selected 1L Measure-
ments" on page 704
CALCulate:FMODel:DELT<Ph_pt>:M1L:CACHe:CLEar:SELected <String>
If the 1-length method is used (CALCulate:FMODel:DELT<Ph_pt>:METHod M1L),
the VNA firmware builds up a cache of coupon measurements (Touchstone files) in the
DeltaL\1LMeasurementCache subfolder of the user data folder
C:\Users\Public\Documents\Rohde-Schwarz\ZNA.
This command deletes the selected file from this cache.
Suffix:
<Ph_pt>
.
Physical port number
Setting parameters:
<String> Path to the Touchstone file, relative to the cache directory.
Usage: Setting only
Options: R&S ZNA-K231
Manual operation: See "Clear All 1L Measurements/Clear Selected 1L Measure-
ments" on page 704
CALCulate:FMODel:DELT<Ph_pt>:M1L:FILename <String>
CALCulate:FMODel:DELT<Ph_pt>:M2L:FILename <String>
CALCulate:FMODel:DELT<Ph_pt>:M3L:FILename <String>
For a Delta-L+ PCB characterization, this command loads the "1L Measurement" data
from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
SCPI command reference