R&S ZNLE Series - Page 14

Preparing for Use
R&S
®
ZNLE
14Getting Started 1323.2873.02 ─ 07
Risk of instrument damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during
transportation and shipment can damage the instrument.
●
Always make sure that sufficient mechanical and electrostatic protection
is provided.
●
When shipping an instrument, use the original packaging. If it is not
available, allow for sufficient padding to prevent the instrument from
moving around inside the box. Pack the instrument in antistatic wrap to
protect it from electrostatic charging.
●
Secure the instrument to prevent any movement and other mechanical
effects during transportation.
The carrying handles are designed to lift or carry the instrument. Do not
apply excessive external force to the handles.
4.1.2 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Printed Getting Started manual
4.1.3 Placing or Mounting the Instrument
The R&S ZNLE is designed for use on a bench top or in a rack.
Bench Top Operation
If the R&S ZNLE is operated on a bench top, the surface should be flat. The
instrument can be used in horizontal position, standing on its feet, or with the sup-
port feet on the bottom extended.
Putting into Operation