R&S ZNLE Series - Page 13

Preparing for Use
R&S
®
ZNLE
13Getting Started 1323.2873.02 ─ 07
EMI impact on measurement results
Electromagnetic interference (EMI) may affect the measurement results.
To suppress generated electromagnetic interference (EMI):
●
Use suitable shielded cables of high quality. For example, use double-
shielded RF and LAN cables.
●
Always terminate open cable ends.
●
Note the EMC classification in the data sheet.
● Unpacking and Checking the Instrument........................................................ 13
● Accessory List................................................................................................. 14
● Placing or Mounting the Instrument................................................................ 14
● Connecting the AC Power...............................................................................16
● Switching the Instrument On and Off.............................................................. 16
4.1.1 Unpacking and Checking the Instrument
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the instrument for any damage. If there is dam-
age, immediately contact the carrier who delivered the instrument. Make sure not
to discard the box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped later, you can use the material to protect the control ele-
ments and connectors.
Putting into Operation