EasyManua.ls Logo

Rane Four - Page 22

Rane Four
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Name Description Control Beats Parameter Depth
2 Beatbreak
Samples the 4
beats of each
bar of the
original signal
and replays
them (within
the same bar)
according to
the selected
pattern. Turn
FX Depth to
adjust the
balance of the
original and
the effected
signal in the
mix.
Paddle Pattern:
1-10
Default: 1
HPF Cut Off:
40 Hz,
80 Hz,
140 Hz, 244
Hz, 427 Hz,
748 Hz, 1308
Hz, 2287 Hz,
4000 Hz
Default: 244
Hz
0-100%
The effect wet
mix is applied
on a linear
scale.
3 Bit Crush
Adds distortion
by reducing the
resolution or
bandwidth of
the original
audio signal.
Turn FX Depth
to adjust the
balance of the
original and the
effected signal
in the mix.
Paddle
Average: 8,
16, 32, 64
Default: 16
Bit Depth:
8, 16
Default: 8
0-100%
The effect wet
mix is applied
on a linear scale.
4 Brake
Simulates a vinyl
turntable stop.
When FX Depth
is centered, the
brake length is
as shown by the
beat’s value.
Turn FX Depth
left or right to
decrease or
increase the
brake length
respectively.
Paddle Beats:
1/2, 1, 2, 4, 8,
16, 32
Default: 2
N/A
< 50% - the
Brake speed is
slower than the
speed as shown
by the beat's
value. Beat
values less than
the current beat
selection are
scaled linearly
from 50-0%.
50% - the Brake
speed is as
shown by the
beat's value.
>50% - the
Brake speed is
faster than the
speed as shown
by the beat's
value. Beat
values greater
than the current
beat selection
are scaled
linearly from 50-
100%.

Related product manuals